Albatros C.II

Albatros C.II
Replica of an Albatros C.II
Role Military reconnaissance biplane
National origin Germany
Manufacturer Albatros Flugzeugwerke
Number built 1

The Albatros C.II was a 1910s German military pusher reconnaissance biplane designed and built by Albatros Flugzeugwerke. Only one aircraft (Idflieg no. C 27/15) was built and the type did not enter production.

Design

The C.II used the wings and landing gear of the earlier C.I but was fitted with a short nacelle rather than a conventional fuselage. The nacelle housed a 150 hp (112 kW) Benz Bz.III engine in a pusher configuration with a two-bladed propeller. The nacelle had an open cockpit for the observer/gunner at the front and the pilot behind. The tail structure used an open frame with a conventional fin and rudder and garnered the nickname Gitterschwanz (en: lattice tail).

This aircraft should not be confused with the OAW (Albatros) C.II which was an unrelated aircraft produced by the Albatros Schneidemühl factory in Austria, known as OAW. (Ostdeutsche Albatros Werke GmbH).

Specifications

Data from

General characteristics

  • Crew: 2 (pilot, gunner/observer)
  • Length: 7.15 m (23 ft 5 in)
  • Wingspan: 12.90 m (42 ft 4 in)
  • Height: 3.26 m (10 ft 8 in)
  • Wing area: 40.50 m2 (435.9 sq ft)
  • Empty weight: 786 kg (1,733 lb)
  • Gross weight: 986 kg (2,174 lb)
  • Powerplant: 1 × Benz Bz.III liquid-cooled inline engine, 110 kW (150 hp)
  • Propellers: 2-bladed
  • Maximum speed: 126 km/h (78 mph, 68 kn)
  • Cruise speed: 105 km/h (65 mph, 57 kn)
  • Range: 300 km (190 mi, 160 nmi)
  • Service ceiling: 3,000 m (9,800 ft)

This page was last updated at 2023-11-08 09:07 UTC. Update now. View original page.

All our content comes from Wikipedia and under the Creative Commons Attribution-ShareAlike License.


Top

If mathematical, chemical, physical and other formulas are not displayed correctly on this page, please useFirefox or Safari