B53 nuclear bomb

B53
TypeThermonuclear weapon
Place of originUnited States
Service history
In service1962–1997
Production history
DesignerLANL
Designed1958–1961
ManufacturerAtomic Energy Commission
Produced1961–1965
No. builtAbout 340
Specifications
Mass8,850 lb (4,010 kg)
Length12 ft 4 in (3.76 m)
Diameter50 in (4.2 ft; 1.3 m)

FillingFission: 100% oralloy
Fusion: Lithium-6 deuteride
Blast yieldY1: 9 megatons Y2: Unknown

The Mk/B53 was a high-yield bunker buster thermonuclear weapon developed by the United States during the Cold War. Deployed on Strategic Air Command bombers, the B53, with a yield of 9 megatons, was the most powerful weapon in the U.S. nuclear arsenal after the last B41 nuclear bombs were retired in 1976.

The B53 was the basis of the W-53 warhead carried by the Titan II missile, which was decommissioned in 1987. Although not in active service for many years before 2010, fifty B53s were retained during that time as part of the "hedge" portion of the Enduring Stockpile until its complete dismantling in 2011. The last B53 was disassembled on 25 October 2011, a year ahead of schedule.

With its retirement, the largest bomb currently in service in the U.S. nuclear arsenal is the B83, with a maximum yield of 1.2 megatons. The B53 was replaced in the bunker-busting role by the B61 Mod 11.

History

Hardtack Oak nuclear weapon test.

Development of the weapon began in 1955 by Los Alamos National Laboratory, based on the earlier Mk 21 and Mk 46 weapons. In March 1958 the Strategic Air Command issued a request for a new Class C (less than five tons, megaton-range) bomb to replace the earlier Mk 41. A revised version of the Mk 46 became the TX-53 in 1959. The development TX-53 warhead was apparently never tested, although an experimental TX-46 predecessor design was detonated 28 June 1958 as Hardtack Oak, which detonated at a yield of 8.9 Megatons.

The Mk 53 entered production in 1962 and was built through June 1965. About 340 bombs were built. It entered service aboard B-47 Stratojet, B-52G Stratofortress, and B-58 Hustler bomber aircraft in the mid-1960s. From 1968 it was redesignated B53.

Some early versions of the bomb were dismantled beginning in 1967. After the Titan II program ended, the remaining W-53s were retired in the late 1980s. The B53 was retired in 1986, but in 1988 50 units were brought back into service and received the B53 Mod 1 safety upgrade so the air force could cover certain targets previously covered by Titan II. These weapons remained in the active stockpile until the deployment of the B61-11 in 1997. At that point the obsolete B53s were slated for immediate disassembly; however, the process of disassembling the units was greatly hampered by safety concerns as well as a lack of resources. In 2010 authorization was given to disassemble the 50 bombs at the Pantex plant in Texas. The process of dismantling the last remaining B53 bomb in the stockpile was completed in 2011.

Specifications

The B53 was 12 feet 4 inches (3.76 m) long with a diameter of 50 inches (4.17 ft; 1.27 m). It weighed 8,850 pounds (4,010 kg), including the W53 warhead, the 800-to-900 lb (360-to-410 kg) parachute system and the honeycomb aluminum nose cone to enable the bomb to survive laydown delivery. It had five parachutes: one 5-foot (1.52 m) pilot chute, one 16-foot (4.88 m) extractor chute, and three 48-foot (14.63 m) main chutes. Chute deployment depends on delivery mode, with the main chutes used only for laydown delivery. For free-fall delivery, the entire system was jettisoned.

The W53 warhead of the B53 used oralloy (highly enriched uranium) instead of plutonium for fission, with a mix of lithium-6 deuteride fuel for fusion. The explosive lens comprised a mixture of RDX and TNT, which was not insensitive. Two variants were made: the B53-Y1, a "dirty" weapon using a U-238-encased secondary, and the B53-Y2 "clean" version with a non-fissile (lead or tungsten) secondary casing. The explosive yield for the Y1 version was declassified in 2014 as being 9 Mt.

In 1988, some B53s were upgraded to the B53 Mod 1 (B53-1) variant to improve weapon safety and to provide compatibility with the G/H variants of the B52 bomber. During this upgrade the weapon lost full-fuzing capability, retaining only the laydown fuzing mode. The B53-1 had a selectable laydown time of 30 to 240 seconds in 30 second increments.

Role

It was intended as a bunker buster weapon, using a surface blast after laydown deployment to transmit a shock wave through the earth to collapse its target. Attacks against the Soviet deep underground leadership shelters in the Chekhov/Sharapovo area south of Moscow envisaged multiple B53/W53 exploding at ground level. It has since been supplanted in such roles by the earth-penetrating B61 Mod 11, a bomb that penetrates the surface to deliver much more of its explosive energy into the ground, and therefore needs a much smaller yield to produce the same effects.

The B53 was intended to be retired in the 1980s, but 50 units remained in the active stockpile until the deployment of the B61-11 in 1997. At that point the obsolete B53s were slated for immediate disassembly; however, the process of disassembling the units was greatly hampered by safety concerns as well as a lack of resources. The last remaining B53 bomb began the disassembly processes on Tuesday, 25 October 2011 at the Energy Department's Pantex Plant.

An April 2014 GAO report notes that the National Nuclear Security Administration (NNSA) is retaining canned sub-assemblies (CSAs) "associated with a certain warhead indicated as excess in the 2012 Production and Planning Directive are being retained in an indeterminate state pending a senior-level government evaluation of their use in planetary defense against earthbound asteroids." In its FY2015 budget request, the NNSA noted that the B53 component disassembly was "delayed", leading some observers to conclude they might be the warhead CSAs being retained for potential planetary defense purposes.

W-53

W53 physics package
W53/Mk53 thermonuclear warhead inside its Mk6 RV.

The W-53 nuclear warhead of the Titan II ICBM used the same physics package as the B53, without the air drop-specific components like the parachute system and crushable structures in the nose and sides needed for lay-down delivery, reducing its mass to about 6,200 lb (2,800 kg). The 8,140-pound (3,690 kg) Mark-6 re-entry vehicle containing the W53 warhead was about 123 inches (10.3 ft; 3.1 m) long, 7.5 feet (2.3 m) in diameter and was mounted atop a spacer which was 8.3 feet (2.5 m) in diameter at the missile interface (compared to the missile's core diameter of 10 feet [3.0 m]). With a yield of 9 megatons, it was the highest yield warhead ever deployed on a US missile. About 65 W53 warheads were constructed between December 1962 and December 1963.

On 19 September 1980 a fuel leak caused a Titan II to explode within its silo in Arkansas, throwing the W53 warhead some distance away. Due to the safety measures built into the weapon, it did not explode or release any radioactive material. Fifty-two active missiles were deployed in silos prior to the beginning of the retirement program in October 1982.

Effects

B53 on display at the Atomic Testing Museum

Assuming a detonation at optimum height, a 9-megaton blast would result in a fireball with an approximate 2.9 to 3.4 mi (4.7 to 5.5 km) diameter. The radiated heat would be sufficient to cause lethal burns to any unprotected person within a 20-mile (32 km) radius (1,250 sq mi or 3,200 km2). Blast effects would be sufficient to collapse most residential and industrial structures within a 9 mi (14 km) radius (254 sq mi or 660 km2); within 3.65 mi (5.87 km) (42 sq mi or 110 km2) virtually all above-ground structures would be destroyed and blast effects would inflict near 100% fatalities. Within 2.25 mi (3.62 km) a 500-rem (5-sievert) dose of ionizing radiation would be received by the average person, sufficient to cause a 50% to 90% casualty rate independent of thermal or blast effects at this distance.

Artifacts


This page was last updated at 2023-10-14 16:12 UTC. Update now. View original page.

All our content comes from Wikipedia and under the Creative Commons Attribution-ShareAlike License.


Top

If mathematical, chemical, physical and other formulas are not displayed correctly on this page, please useFirefox or Safari