Gore Hill Freeway

Gore Hill Freeway

Gore Hill Freeway in Lane Cove
Gore Hill Freeway is located in Sydney
Western end
Western end
Eastern end
Eastern end
Coordinates
General information
TypeFreeway
Length3.2 km (2.0 mi)
Opened26 August 1992
GazettedJanuary 1993
Route number(s) M1 (2013–present)
Former
route number
  • Metroad 1 (1993–2013)
  • Metroad 2 (1993–2007)
  • State Route 28 (1992–1993)
  • National Route 1 (1992–1993)
Major junctions
Western endLongueville Road
Lane Cove, Sydney
 
Eastern end Warringah Freeway
Naremburn, Sydney
Location(s)
Major suburbs / townsArtarmon
Highway system

Gore Hill Freeway is a 4-kilometre (2.5 mi) divided freeway located in Sydney, New South Wales that is part of the Sydney Orbital Network and Highway 1. The primary function of the freeway is to provide an alternative high-grade route from Lane Cove to Naremburn and to reduce traffic demands on Pacific Highway throughout Sydney's lower north shore, bypassing St Leonards and Gore Hill.

Route

Gore Hill Freeway commences at the interchange of Pacific Highway and Longueville Road at Lane Cove, and heads east as a four-lane, dual-carriageway road, widening to 6 lanes a short distance later east of the ramps to the northern section of Pacific Highway. It curves to a southeasterly direction before terminating at the interchange at Warringah Freeway and Willoughby Road at Naremburn. Road signs designate Gore Hill Freeway simply as Freeway.

Forming part of the Sydney Orbital Network, the freeway provides access to most of the suburbs in Sydney; it is also a major route to the north, south, east and west of the metropolis.

Sound walls were pioneered as both art and architecture incorporating abstract road motifs in bas relief concrete and historical designs by Walter Burley Griffin. The language reinterprets local aboriginal rock engravings chipped into the ribbed retaining walls.

History

Construction of the freeway commenced in August 1988 as part of the Bicentennial Roads Program and opened to traffic on 26 August 1992. This connected Pacific Highway at Lane Cove to Warringah Freeway and eventually to the Sydney Harbour Bridge via a high-standard freeway route, bypassing the congested section of Pacific Highway through North Sydney.

The passing of the Main Roads Act of 1924 through the Parliament of New South Wales provided for the declaration of Main Roads, roads partially funded by the State government through the Main Roads Board (later the Department of Main Roads, and eventually Transport for NSW). With the subsequent passing of the Main Roads (Amendment) Act of 1929 to provide for additional declarations of State Highways and Trunk Roads, the Department of Main Roads (having succeeded the MRB in 1932) declared Main Road 651 along the freeway, from the interchange with Pacific Highway and Longueville Road in Lane Cove to the interchange with Warringah Freeway and Willoughby Road in Naremburn (and continuing south along Warringah Freeway to North Sydney), on 22 January 1993. Despite its role as a grade-separated freeway, the road is not officially gazetted as one by Transport for NSW classification, and is still considered today to be a main road.

The passing of the Roads Act of 1993 updated road classifications and the way they could be declared within New South Wales. Under this act, Gore Hill Freeway retains its declaration as part of Main Road 651.

The freeway was allocated National Route 1, and State Route 28 was extended from its previous terminus (at Longueville Road and Pacific Highway in Lane Cove) along Gore Hill Freeway, when it opened in 1992. National Route 1 was replaced by Metroad 1, and State Route 28 was replaced by Metroad 2, in 1993; Metroad 2 was eventually removed when the Lane Cove Tunnel opened in 2007. With the conversion to the newer alphanumeric system in 2013, Metroad 1 was replaced by route M1.

Exits and interchanges

Gore Hill Freeway is entirely contained within the City of Willoughby local government area.

LocationkmmiDestinationsNotes
Lane CoveLane Cove NorthArtarmon tripoint0.00.0Longueville Road – Lane Cove
to Epping Road – North Ryde, Epping
Western terminus of freeway
Pacific Highway (A1 north, unallocated south) – Wahroonga, Chatswood, Crows NestWestern terminus of route M1; route A1 continues north along Pacific Highway
Artarmon0.50.31 Lane Cove Tunnel (M2) – Baulkham Hills, WindsorEastbound entrance and westbound exit only
0.90.56Reserve Road – ArtarmonNo westbound entrance or eastbound exit to Pacific Highway
1.60.99North Shore railway line
Naremburn3.22.0Willoughby Road – Crows Nest, RosevilleEastbound exit and westbound entrance only
Warringah Freeway (M1) – North Sydney, Sydney CBD, Sydney AirportEastern terminus of freeway, route M1 continues southeast along Warringah Freeway
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also


This page was last updated at 2024-03-25 10:04 UTC. Update now. View original page.

All our content comes from Wikipedia and under the Creative Commons Attribution-ShareAlike License.


Top

If mathematical, chemical, physical and other formulas are not displayed correctly on this page, please useFirefox or Safari