Mercury (element)

Mercury, 80Hg
Appearanceshiny, silvery liquid
Standard atomic weight Ar°(Hg)
Mercury in the periodic table
Hydrogen Helium
Lithium Beryllium Boron Carbon Nitrogen Oxygen Fluorine Neon
Sodium Magnesium Aluminium Silicon Phosphorus Sulfur Chlorine Argon
Potassium Calcium Scandium Titanium Vanadium Chromium Manganese Iron Cobalt Nickel Copper Zinc Gallium Germanium Arsenic Selenium Bromine Krypton
Rubidium Strontium Yttrium Zirconium Niobium Molybdenum Technetium Ruthenium Rhodium Palladium Silver Cadmium Indium Tin Antimony Tellurium Iodine Xenon
Caesium Barium Lanthanum Cerium Praseodymium Neodymium Promethium Samarium Europium Gadolinium Terbium Dysprosium Holmium Erbium Thulium Ytterbium Lutetium Hafnium Tantalum Tungsten Rhenium Osmium Iridium Platinum Gold Mercury (element) Thallium Lead Bismuth Polonium Astatine Radon
Francium Radium Actinium Thorium Protactinium Uranium Neptunium Plutonium Americium Curium Berkelium Californium Einsteinium Fermium Mendelevium Nobelium Lawrencium Rutherfordium Dubnium Seaborgium Bohrium Hassium Meitnerium Darmstadtium Roentgenium Copernicium Nihonium Flerovium Moscovium Livermorium Tennessine Oganesson


Atomic number (Z)80
Groupgroup 12
Periodperiod 6
Block  d-block
Electron configuration[Xe] 4f14 5d10 6s2
Electrons per shell2, 8, 18, 32, 18, 2
Physical properties
Phase at STPliquid
Melting point234.3210 K ​(−38.8290 °C, ​−37.8922 °F)
Boiling point629.88 K ​(356.73 °C, ​674.11 °F)
Density (near r.t.)13.546 g/cm3
Triple point234.3156 K, ​1.65×10−7 kPa
Critical point1750 K, 172.00 MPa
Heat of fusion2.29 kJ/mol
Heat of vaporization59.11 kJ/mol
Molar heat capacity27.983 J/(mol·K)
Vapor pressure
P (Pa) 1 10 100 1 k 10 k 100 k
at T (K) 315 350 393 449 523 629
Atomic properties
Oxidation states−2 , +1, +2 (a mildly basic oxide)
ElectronegativityPauling scale: 2.00
Ionization energies
  • 1st: 1007.1 kJ/mol
  • 2nd: 1810 kJ/mol
  • 3rd: 3300 kJ/mol
Atomic radiusempirical: 151 pm
Covalent radius132±5 pm
Van der Waals radius155 pm
Color lines in a spectral range
Spectral lines of mercury
Other properties
Natural occurrenceprimordial
Crystal structurerhombohedral
Rhombohedral crystal structure for mercury
Speed of soundliquid: 1451.4 m/s (at 20 °C)
Thermal expansion60.4 µm/(m⋅K) (at 25 °C)
Thermal conductivity8.30 W/(m⋅K)
Electrical resistivity961 nΩ⋅m (at 25 °C)
Magnetic orderingdiamagnetic
Molar magnetic susceptibility−33.44×10−6 cm3/mol (293 K)
CAS Number7439-97-6
DiscoveryAncient Egyptians (before 1500 BCE)
Symbol"Hg": from its Latin name hydrargyrum, itself from Greek hydrárgyros, 'water-silver'
Isotopes of mercury
Main isotopes Decay
abun­dance half-life (t1/2) mode pro­duct
194Hg synth 444 y ε 194Au
195Hg synth 9.9 h ε 195Au
196Hg 0.15% stable
197Hg synth 64.14 h ε 197Au
198Hg 10.0% stable
199Hg 16.9% stable
200Hg 23.1% stable
201Hg 13.2% stable
202Hg 29.7% stable
203Hg synth 46.612 d β 203Tl
204Hg 6.82% stable
 Category: Mercury (element)
| references

Mercury is a chemical element; it has symbol Hg and atomic number 80. It is also known as quicksilver and was formerly named hydrargyrum (/haɪˈdrɑːrdʒərəm/ hy-DRAR-jər-əm) from the Greek words hydor (water) and argyros (silver). A heavy, silvery d-block element, mercury is the only metallic element that is known to be liquid at standard temperature and pressure; the only other element that is liquid under these conditions is the halogen bromine, though metals such as caesium, gallium, and rubidium melt just above room temperature.

Mercury occurs in deposits throughout the world mostly as cinnabar (mercuric sulfide). The red pigment vermilion is obtained by grinding natural cinnabar or synthetic mercuric sulfide. Exposure to mercury and mercury-containing organic compounds is toxic to the nervous system, immune system and kidneys of humans and other animals; mercury poisoning can result from exposure to water-soluble forms of mercury (such as mercuric chloride or methylmercury) either directly or through mechanisms of biomagnification.

Mercury is used in thermometers, barometers, manometers, sphygmomanometers, float valves, mercury switches, mercury relays, fluorescent lamps and other devices, although concerns about the element's toxicity have led to the phasing out of such mercury-containing instruments. It remains in use in scientific research applications and in amalgam for dental restoration in some locales. It is also used in fluorescent lighting. Electricity passed through mercury vapor in a fluorescent lamp produces short-wave ultraviolet light, which then causes the phosphor in the tube to fluoresce, making visible light.


Physical properties

An old pound coin (density ~7.6 g/cm3) floats on mercury due to the combination of the buoyant force and surface tension.

Mercury is a heavy, silvery-white metal that is liquid at room temperature. Compared to other metals, it is a poor conductor of heat, but a fair conductor of electricity.

It has a freezing point of −38.83 °C and a boiling point of 356.73 °C, both the lowest of any stable metal, although preliminary experiments on copernicium and flerovium have indicated that they have even lower boiling points. This effect is due to lanthanide contraction and relativistic contraction reducing the radius of the outermost electrons, and thus weakening the metallic bonding in mercury. Upon freezing, the volume of mercury decreases by 3.59% and its density changes from 13.69 g/cm3 when liquid to 14.184 g/cm3 when solid. The coefficient of volume expansion is 181.59 × 10−6 at 0 °C, 181.71 × 10−6 at 20 °C and 182.50 × 10−6 at 100 °C (per °C). Solid mercury is malleable and ductile, and can be cut with a knife.

Table of thermal and physical properties of liquid mercury:

Temperature (°C) Density (kg/m^3) Specific heat (kJ/kg K) Kinematic viscosity (m^2/s) Conductivity (W/m K) Thermal diffusivity (m^2/s) Prandtl Number Bulk modulus (K^-1)
0 13628.22 0.1403 1.24E-07 8.2 4.30E-06 0.0288 0.000181
20 13579.04 0.1394 1.14E-07 8.69 4.61E-06 0.0249 0.000181
50 13505.84 0.1386 1.04E-07 9.4 5.02E-06 0.0207 0.000181
100 13384.58 0.1373 9.28E-08 10.51 5.72E-06 0.0162 0.000181
150 13264.28 0.1365 8.53E-08 11.49 6.35E-06 0.0134 0.000181
200 13144.94 0.157 8.02E-08 12.34 6.91E-06 0.0116 0.000181
250 13025.6 0.1357 7.65E-08 13.07 7.41E-06 0.0103 0.000183
315.5 12847 0.134 6.73E-08 14.02 8.15E-06 0.0083 0.000186

Chemical properties

Mercury does not react with most acids, such as dilute sulfuric acid, although oxidizing acids such as concentrated sulfuric acid and nitric acid or aqua regia dissolve it to give sulfate, nitrate, and chloride. Like silver, mercury reacts with atmospheric hydrogen sulfide. Mercury reacts with solid sulfur flakes, which are used in mercury spill kits to absorb mercury (spill kits also use activated carbon and powdered zinc).


Mercury-discharge spectral calibration lamp

Mercury dissolves many metals such as gold and silver to form amalgams. Iron is an exception, and iron flasks have traditionally been used to transport the material. Several other first row transition metals with the exception of manganese, copper and zinc are also resistant in forming amalgams. Other elements that do not readily form amalgams with mercury include platinum. Sodium amalgam is a common reducing agent in organic synthesis, and is also used in high-pressure sodium lamps.

Mercury readily combines with aluminium to form a mercury-aluminium amalgam when the two pure metals come into contact. Since the amalgam destroys the aluminium oxide layer which protects metallic aluminium from oxidizing in-depth (as in iron rusting), even small amounts of mercury can seriously corrode aluminium. For this reason, mercury is not allowed aboard an aircraft under most circumstances because of the risk of it forming an amalgam with exposed aluminium parts in the aircraft.

Mercury embrittlement is the most common type of liquid metal embrittlement, as mercury is a natural component of some hydrocarbon reservoirs and will come into contact with petroleum processing equipment under normal conditions.


There are seven stable isotopes of mercury, with 202
being the most abundant (29.86%). The longest-lived radioisotopes are 194
with a half-life of 444 years, and 203
with a half-life of 46.612 days. Most of the remaining radioisotopes have half-lives that are less than a day. 206
occurs naturally in tiny traces as an intermediate decay product of 238
. 199
and 201
are the most often studied NMR-active nuclei, having spins of 12 and 32 respectively.


The symbol for the planet Mercury (☿) has been used since ancient times to represent the element

"Hg" is the modern chemical symbol for mercury. It is an abbreviation of hydrargyrum, a romanized form of the ancient Greek name for mercury, ὑδράργυρος (hydrargyros). Hydrargyros is a Greek compound word meaning "water-silver", from ὑδρ- (hydr-), the root of ὕδωρ (hydor) "water", and ἄργυρος (argyros) "silver". Like the English name quicksilver ("living-silver"), this name was due to mercury's liquid and shiny properties.

The modern English name "mercury" comes from the planet Mercury. In medieval alchemy, the seven known metals—quicksilver, gold, silver, copper, iron, lead, and tin—were associated with the seven planets. Quicksilver was associated with the fastest planet, which had been named after the Roman god Mercury, who was associated with speed and mobility. The astrological symbol for the planet became one of the alchemical symbols for the metal, and "Mercury" became an alternative name for the metal. Mercury is the only metal for which the alchemical planetary name survives, as it was decided it was preferable to "quicksilver" as a chemical name.


Mercury was found in Egyptian tombs that date from 1500 BC; cinnabar, the most common natural source of mercury, has been in use since the Neolithic Age.

In China and Tibet, mercury use was thought to prolong life, heal fractures, and maintain generally good health, although it is now known that exposure to mercury vapor leads to serious adverse health effects. The first emperor of a unified China, Qín Shǐ Huáng Dì—allegedly buried in a tomb that contained rivers of flowing mercury on a model of the land he ruled, representative of the rivers of China—was reportedly killed by drinking a mercury and powdered jade mixture formulated by Qin alchemists intended as an elixir of immortality. Khumarawayh ibn Ahmad ibn Tulun, the second Tulunid ruler of Egypt (r. 884–896), known for his extravagance and profligacy, reportedly built a basin filled with mercury, on which he would lie on top of air-filled cushions and be rocked to sleep.

In November 2014 "large quantities" of mercury were discovered in a chamber 60 feet below the 1800-year-old pyramid known as the "Temple of the Feathered Serpent," "the third largest pyramid of Teotihuacan," Mexico along with "jade statues, jaguar remains, a box filled with carved shells and rubber balls".

Aristotle recounts that Daedalus made a wooden statue of Venus move by pouring quicksilver in its interior. In Greek mythology Daedalus gave the appearance of voice in his statues using quicksilver. The ancient Greeks used cinnabar (mercury sulfide) in ointments; the ancient Egyptians and the Romans used it in cosmetics. In Lamanai, once a major city of the Maya civilization, a pool of mercury was found under a marker in a Mesoamerican ballcourt. By 500 BC mercury was used to make amalgams (Medieval Latin amalgama, "alloy of mercury") with other metals.

Alchemists thought of mercury as the First Matter from which all metals were formed. They believed that different metals could be produced by varying the quality and quantity of sulfur contained within the mercury. The purest of these was gold, and mercury was called for in attempts at the transmutation of base (or impure) metals into gold, which was the goal of many alchemists.

The mines in Almadén (Spain), Monte Amiata (Italy), and Idrija (now Slovenia) dominated mercury production from the opening of the mine in Almadén 2500 years ago, until new deposits were found at the end of the 19th century.


Mercury is an extremely rare element in Earth's crust, having an average crustal abundance by mass of only 0.08 parts per million (ppm). Because it does not blend geochemically with those elements that constitute the majority of the crustal mass, mercury ores can be extraordinarily concentrated considering the element's abundance in ordinary rock. The richest mercury ores contain up to 2.5% mercury by mass, and even the leanest concentrated deposits are at least 0.1% mercury (12,000 times average crustal abundance). It is found either as a native metal (rare) or in cinnabar, metacinnabar, sphalerite, corderoite, livingstonite and other minerals, with cinnabar (HgS) being the most common ore. Mercury ores often occur in hot springs or other volcanic regions.

Beginning in 1558, with the invention of the patio process to extract silver from ore using mercury, mercury became an essential resource in the economy of Spain and its American colonies. Mercury was used to extract silver from the lucrative mines in New Spain and Peru. Initially, the Spanish Crown's mines in Almadén in Southern Spain supplied all the mercury for the colonies. Mercury deposits were discovered in the New World, and more than 100,000 tons of mercury were mined from the region of Huancavelica, Peru, over the course of three centuries following the discovery of deposits there in 1563. The patio process and later pan amalgamation process continued to create great demand for mercury to treat silver ores until the late 19th century.

Native mercury with cinnabar, Socrates mine, Sonoma County, California. Cinnabar sometimes alters to native mercury in the oxidized zone of mercury deposits.

Former mines in Italy, the United States and Mexico, which once produced a large proportion of the world supply, have now been completely mined out or, in the case of Slovenia (Idrija) and Spain (Almadén), shut down due to the fall of the price of mercury. Nevada's McDermitt Mine, the last mercury mine in the United States, closed in 1992. The price of mercury has been highly volatile over the years and in 2006 was $650 per 76-pound (34.46 kg) flask.

Mercury is extracted by heating cinnabar in a current of air and condensing the vapor. The equation for this extraction is:

HgS + O2 → Hg + SO2
Evolution of mercury price (U.S.) and production (worldwide)

In 2020, China was the top producer of mercury, providing 88% of the world output (2200 out of 2500 tonnes), followed by Tajikistan (178 t), Russia (50 t) and Mexico (32 t).

Because of the high toxicity of mercury, both the mining of cinnabar and refining for mercury are hazardous and historic causes of mercury poisoning. In China, prison labor was used by a private mining company as recently as the 1950s to develop new cinnabar mines. Thousands of prisoners were used by the Luo Xi mining company to establish new tunnels. Worker health in functioning mines is at high risk.

A newspaper claimed that an unidentified European Union directive calling for energy-efficient lightbulbs to be made mandatory by 2012 encouraged China to re-open cinnabar mines to obtain the mercury required for CFL bulb manufacture. Environmental dangers have been a concern, particularly in the southern cities of Foshan and Guangzhou, and in Guizhou province in the southwest.

Abandoned mercury mine processing sites often contain very hazardous waste piles of roasted cinnabar calcines. Water run-off from such sites is a recognized source of ecological damage. Former mercury mines may be suited for constructive re-use; for example, in 1976 Santa Clara County, California purchased the historic Almaden Quicksilver Mine and created a county park on the site, after conducting extensive safety and environmental analysis of the property.


All known mercury compounds exhibit one of two positive oxidation states: I and II. Experiments have failed to unequivocally demonstrate any higher oxidation states: both the claimed 1976 electrosynthesis of an unstable Hg(III) species and 2007 cryogenic isolation of HgF4 have disputed interpretations and remain difficult (if not impossible) to reproduce.

Compounds of mercury(I)

Unlike its lighter neighbors, cadmium and zinc, mercury usually forms simple stable compounds with metal-metal bonds. Most mercury(I) compounds are diamagnetic and feature the dimeric cation, Hg2+
. Stable derivatives include the chloride and nitrate. Treatment of Hg(I) compounds complexation with strong ligands such as sulfide, cyanide, etc. and induces disproportionation to Hg2+
and elemental mercury. Mercury(I) chloride, a colorless solid also known as calomel, is really the compound with the formula Hg2Cl2, with the connectivity Cl-Hg-Hg-Cl. It reacts with chlorine to give mercuric chloride, which resists further oxidation. Mercury(I) hydride, a colorless gas, has the formula HgH, containing no Hg-Hg bond; however, the gas has only ever been observed as isolated molecules.

Indicative of its tendency to bond to itself, mercury forms mercury polycations, which consist of linear chains of mercury centers, capped with a positive charge. One example is Hg2+


Compounds of mercury(II)

Mercury(II) is the most common oxidation state and is the main one in nature as well. All four mercuric halides are known and have been demonstrated to form linear coordination geometry, despite mercury's tendency to form tetrahedral molecular geometry with other ligands. This behavior is similar to the Ag+ ion. The best known mercury halide is mercury(II) chloride, an easily sublimating white solid.

Mercury(II) oxide, the main oxide of mercury, arises when the metal is exposed to air for long periods at elevated temperatures. It reverts to the elements upon heating near 400 °C, as was demonstrated by Joseph Priestley in an early synthesis of pure oxygen. Hydroxides of mercury are poorly characterized, as attempted isolation studies of mercury(II) hydroxide have yielded mercury oxide instead.

Being a soft metal, mercury forms very stable derivatives with the heavier chalcogens. Preeminent is mercury(II) sulfide, HgS, which occurs in nature as the ore cinnabar and is the brilliant pigment vermilion. Like ZnS, HgS crystallizes in two forms, the reddish cubic form and the black zinc blende form. The latter sometimes occurs naturally as metacinnabar. Mercury(II) selenide (HgSe) and mercury(II) telluride (HgTe) are also known, these as well as various derivatives, e.g. mercury cadmium telluride and mercury zinc telluride being semiconductors useful as infrared detector materials.

Mercury(II) salts form a variety of complex derivatives with ammonia. These include Millon's base (Hg2N+), the one-dimensional polymer (salts of HgNH+
), and "fusible white precipitate" or [Hg(NH3)2]Cl2. Known as Nessler's reagent, potassium tetraiodomercurate(II) (HgI2−
) is still occasionally used to test for ammonia owing to its tendency to form the deeply colored iodide salt of Millon's base.

Mercury fulminate is a detonator widely used in explosives.

Organomercury compounds

Organic mercury compounds are historically important but are of little industrial value in the western world. Mercury(II) salts are a rare example of simple metal complexes that react directly with aromatic rings. Organomercury compounds are always divalent and usually two-coordinate and linear geometry. Unlike organocadmium and organozinc compounds, organomercury compounds do not react with water. They usually have the formula HgR2, which are often volatile, or HgRX, which are often solids, where R is aryl or alkyl and X is usually halide or acetate. Methylmercury, a generic term for compounds with the formula CH3HgX, is a dangerous family of compounds that are often found in polluted water. They arise by a process known as biomethylation.


The bulb of a mercury-in-glass thermometer

Mercury is used primarily for the manufacture of industrial chemicals or for electrical and electronic applications. It is used in some liquid-in-glass thermometers, especially those used to measure high temperatures. A still increasing amount is used as gaseous mercury in fluorescent lamps, while most of the other applications are slowly being phased out due to health and safety regulations. In some applications, mercury is replaced with less toxic but considerably more expensive Galinstan alloy.


Amalgam filling

Historical and folk

Mercury and its compounds have been used in medicine, although they are much less common today than they once were, now that the toxic effects of mercury and its compounds are more widely understood. An example of the early therapeutic application of mercury of was published in 1787 by James Lind.

The first edition of the Merck's Manual (1899) featured many then-medically relevant mercuric compounds, such as mercury-ammonium chloride, yellow mercury proto-iodide, calomel, and mercuric chloride, among others.

Mercury in the form of one of its common ores, cinnabar, is used in various traditional medicines, especially in traditional Chinese medicine. Review of its safety has found that cinnabar can lead to significant mercury intoxication when heated, consumed in overdose, or taken long term, and can have adverse effects at therapeutic doses, though effects from therapeutic doses are typically reversible. Although this form of mercury appears to be less toxic than other forms, its use in traditional Chinese medicine has not yet been justified, as the therapeutic basis for the use of cinnabar is not clear.

Mercury(I) chloride (also known as calomel or mercurous chloride) has been used in traditional medicine as a diuretic, topical disinfectant, and laxative. Mercury(II) chloride (also known as mercuric chloride or corrosive sublimate) was once used to treat syphilis (along with other mercury compounds), although it is so toxic that sometimes the symptoms of its toxicity were confused with those of the syphilis it was believed to treat. It is also used as a disinfectant. Blue mass, a pill or syrup in which mercury is the main ingredient, was prescribed throughout the 19th century for numerous conditions including constipation, depression, child-bearing and toothaches. In the early 20th century, mercury was administered to children yearly as a laxative and dewormer, and it was used in teething powders for infants. The mercury-containing organohalide merbromin (sometimes sold as Mercurochrome) is still widely used but has been banned in some countries, such as the U.S.


Mercury is an ingredient in dental amalgams.

Thiomersal (called Thimerosal in the United States) is an organic compound used as a preservative in vaccines, although this use is in decline. Although it was widely speculated that this mercury-based preservative could cause or trigger autism in children, no evidence supports any such link. Nevertheless, thiomersal has been removed from, or reduced to trace amounts in all U.S. vaccines recommended for children 6 years of age and under, with the exception of the inactivated influenza vaccine. Merbromin (Mercurochrome), another mercury compound, is a topical antiseptic used for minor cuts and scrapes in some countries. Today, the use of mercury in medicine has greatly declined in all respects, especially in developed countries.

Mercury is still used in some diuretics, although substitutes such as thiazides now exist for most therapeutic uses. In 2003, mercury compounds were found in some over-the-counter drugs, including topical antiseptics, stimulant laxatives, diaper-rash ointment, eye drops, and nasal sprays. The FDA has "inadequate data to establish general recognition of the safety and effectiveness" of the mercury ingredients in these products.

Production of chlorine and caustic soda

Chlorine is produced from sodium chloride (common salt, NaCl) using electrolysis to separate the metallic sodium from the chlorine gas. Usually the salt is dissolved in water to produce a brine. By-products of any such chloralkali process are hydrogen (H2) and sodium hydroxide (NaOH), which is commonly called caustic soda or lye. By far the largest use of mercury in the late 20th century was in the mercury cell process (also called the Castner-Kellner process) where metallic sodium is formed as an amalgam at a cathode made from mercury; this sodium is then reacted with water to produce sodium hydroxide. Many of the industrial mercury releases of the 20th century came from this process, although modern plants claim to be safe in this regard. From the 1960s onward, the majority of industrial plants moved away from mercury cell processes towards diaphragm cell technologies to produce chlorine, though 11% of the chlorine made in the United States was still produced with the mercury cell method as of 2005.

Laboratory uses


Thermometers containing mercury were invented in the early 18th century by Daniel Gabriel Fahrenheit, though earlier attempts at making temperature-measuring instruments filled with quicksilver had been described in the 1650s.: 23  Fahrenheit's mercury thermometer was based off an earlier design that used alcohol rather than mercury; the mercury thermometer was significantly more accurate than those using alcohol. From the early 21st century onwards, the use of mercury thermometers has been declining, and mercury-containing instruments have been banned in many jurisdictions following the 1998 Protocol on Heavy Metals. Modern alternatives to mercury thermometers include resistance thermometers, thermocouples, and thermistor sensors that output to a digital display.


Some transit telescopes use a basin of mercury to form a flat and absolutely horizontal mirror, useful in determining an absolute vertical or perpendicular reference. Concave horizontal parabolic mirrors may be formed by rotating liquid mercury on a disk, the parabolic form of the liquid thus formed reflecting and focusing incident light. Such liquid-mirror telescopes are cheaper than conventional large mirror telescopes by up to a factor of 100, but the mirror cannot be tilted and always points straight up.


Liquid mercury is part of a popular secondary reference electrode (called the calomel electrode) in electrochemistry as an alternative to the standard hydrogen electrode. The calomel electrode is used to work out the electrode potential of half cells. The triple point of mercury, −38.8344 °C, is a fixed point used as a temperature standard for the International Temperature Scale (ITS-90).

Polarography and crystallography

In polarography, both the dropping mercury electrode and the hanging mercury drop electrode use elemental mercury. This use allows a new uncontaminated electrode to be available for each measurement or each new experiment.

Mercury-containing compounds are also of use in the field of structural biology. Mercuric compounds such as mercury(II) chloride or potassium tetraiodomercurate(II) can be added to protein crystals in an effort to create heavy atom derivatives that can be used to solve the phase problem in X-ray crystallography via isomorphous replacement or anomalous scattering methods.

Niche uses

Gaseous mercury is used in mercury-vapor lamps and some "neon sign" type advertising signs and fluorescent lamps. Those low-pressure lamps emit very spectrally narrow lines, which are traditionally used in optical spectroscopy for calibration of spectral position. Commercial calibration lamps are sold for this purpose; reflecting a fluorescent ceiling light into a spectrometer is a common calibration practice. Gaseous mercury is also found in some electron tubes, including ignitrons, thyratrons, and mercury arc rectifiers. It is also used in specialist medical care lamps for skin tanning and disinfection. Gaseous mercury is added to cold cathode argon-filled lamps to increase the ionization and electrical conductivity. An argon-filled lamp without mercury will have dull spots and will fail to light correctly. Lighting containing mercury can be bombarded/oven pumped only once. When added to neon filled tubes, inconsistent red and blue spots are produced in the light emissions until the initial burning-in process is completed; eventually it will light a consistent dull off-blue color.

The Deep Space Atomic Clock (DSAC) under development by the Jet Propulsion Laboratory utilises mercury in a linear ion-trap-based clock. The novel use of mercury permits the creation of compact atomic clocks with low energy requirements ideal for space probes and Mars missions.

Skin whitening

Mercury is effective as an active ingredient in skin whitening compounds used to depigment skin. The Minamata Convention on Mercury limits the concentration of mercury in such whiteners to 1 part per million. However, as of 2022, many commercially sold whitener products continue to exceed that limit, and are considered toxic.


Mercury(II) fulminate is a primary explosive, which has mainly been used as a primer of a cartridge in firearms throughout the 19th and 20th centuries.

Historic uses

A single-pole, single-throw (SPST) mercury switch
Mercury manometer to measure pressure

Many historic applications made use of the peculiar physical properties of mercury, especially as a dense liquid and a liquid metal:

  • Quantities of liquid mercury ranging from 90 to 600 grams (3.2 to 21.2 oz) have been recovered from elite Maya tombs (100–700 AD) or ritual caches at six sites. This mercury may have been used in bowls as mirrors for divinatory purposes. Five of these date to the Classic Period of Maya civilization (c. 250–900) but one example predated this.
  • In Islamic Spain, it was used for filling decorative pools. Later, the American artist Alexander Calder built a mercury fountain for the Spanish Pavilion at the 1937 World Exhibition in Paris. The fountain is now on display at the Fundació Joan Miró in Barcelona.
  • The Fresnel lenses of old lighthouses used to float and rotate in a bath of mercury which acted like a bearing.
  • Mercury sphygmomanometers, barometers, diffusion pumps, coulometers, and many other laboratory instruments took advantage of mercury's properties as a very dense, opaque liquid with a nearly linear thermal expansion.
  • As an electrically conductive liquid, it was used in mercury switches (including home mercury light switches installed prior to 1970), tilt switches used in old fire detectors and in some home thermostats.
  • Owing to its acoustic properties, mercury was used as the propagation medium in delay-line memory devices used in early digital computers of the mid-20th century, such as the SEAC computer.
  • In 1911, Heike Kamerlingh Onnes discovered superconductivity through the cooling of mercury below 4 kelvin shortly after the discovery and production of liquid helium. Its superconductive properties were later determined to be unusual compared to other later-discovered superconductors, such as the more popular niobium alloys.
  • Experimental mercury vapor turbines were installed to increase the efficiency of fossil-fuel electrical power plants. The South Meadow power plant in Hartford, CT employed mercury as its working fluid, in a binary configuration with a secondary water circuit, for a number of years starting in the late 1920s in a drive to improve plant efficiency. Several other plants were built, including the Schiller Station in Portsmouth, NH, which went online in 1950. The idea did not catch on industry-wide due to the weight and toxicity of mercury, as well as the advent of supercritical steam plants in later years.
  • Similarly, liquid mercury was used as a coolant for some nuclear reactors; however, sodium is proposed for reactors cooled with liquid metal, because the high density of mercury requires much more energy to circulate as coolant.
  • Mercury was a propellant for early ion engines in electric space propulsion systems. Advantages were mercury's high molecular weight, low ionization energy, low dual-ionization energy, high liquid density and liquid storability at room temperature. Disadvantages were concerns regarding environmental impact associated with ground testing and concerns about eventual cooling and condensation of some of the propellant on the spacecraft in long-duration operations. The first spaceflight to use electric propulsion was a mercury-fueled ion thruster developed at NASA Glenn Research Center and flown on the Space Electric Rocket Test "SERT-1" spacecraft launched by NASA at its Wallops Flight Facility in 1964. The SERT-1 flight was followed up by the SERT-2 flight in 1970. Mercury and caesium were preferred propellants for ion engines until Hughes Research Laboratory performed studies finding xenon gas to be a suitable replacement. Xenon is now the preferred propellant for ion engines, as it has a high molecular weight, little or no reactivity due to its noble gas nature, and high liquid density under mild cryogenic storage.

Other applications made use of the chemical properties of mercury:

  • The mercury battery is a non-rechargeable electrochemical battery, a primary cell, that was common in the middle of the 20th century. It was used in a wide variety of applications and was available in various sizes, particularly button sizes. Its constant voltage output and long shelf life gave it a niche use for camera light meters and hearing aids. The mercury cell was effectively banned in most countries in the 1990s due to concerns about the mercury contaminating landfills.
  • Mercury was used for preserving wood, developing daguerreotypes, silvering mirrors, anti-fouling paints, herbicides, interior latex paint, handheld maze games, cleaning, and road leveling devices in cars. Mercury compounds have been used in antiseptics, laxatives, antidepressants, and in antisyphilitics. Mercury has been replaced with safer compounds in most, if not all, of these applications.
  • It was allegedly used by allied spies to sabotage Luftwaffe planes: a mercury paste was applied to bare aluminium, causing the metal to rapidly corrode; this would cause structural failures.
  • Mercury was once used as a gun barrel bore cleaner.
  • From the mid-18th to the mid-19th centuries, a process called "carroting" was used in the making of felt hats. Animal skins were rinsed in an orange solution (the term "carroting" arose from this color) of the mercury compound mercuric nitrate, Hg(NO3)2·2H2O. This process separated the fur from the pelt and matted it together. This solution and the vapors it produced were highly toxic. The United States Public Health Service banned the use of mercury in the felt industry in December 1941. The psychological symptoms associated with mercury poisoning inspired the phrase "mad as a hatter". Lewis Carroll's "Mad Hatter" in his book Alice's Adventures in Wonderland was a play on words based on the older phrase, but the character himself does not exhibit symptoms of mercury poisoning.
  • Historically, mercury was used extensively in hydraulic gold mining in order to help the gold to sink through the flowing water-gravel mixture. Thin gold particles may form mercury-gold amalgam and therefore increase the gold recovery rates. Large-scale use of mercury stopped in the 1960s. However, mercury is still used in small scale, often clandestine, gold prospecting. It is estimated that 45,000 metric tons of mercury used in California for placer mining have not been recovered. Mercury was also used in silver mining to extract the metal from ore through the patio process.

Toxicity and safety

GHS labelling:
GHS06: ToxicGHS08: Health hazardGHS09: Environmental hazard
H330, H360D, H372, H410
P201, P233, P260, P273, P280, P304, P308, P310, P313, P340, P391, P403
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 0: Will not burn. E.g. waterInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code

Mercury can be absorbed through the skin and mucous membranes and mercury vapors can be inhaled, so containers of mercury are securely sealed to avoid spills and evaporation. Heating of mercury, or of compounds of mercury that may decompose when heated, should be carried out with adequate ventilation in order to minimize exposure to mercury vapor. The most toxic forms of mercury are its organic compounds, such as dimethylmercury and methylmercury. Mercury can cause both chronic and acute poisoning.

Releases in the environment

Amount of atmospheric mercury deposited at Wyoming's Upper Fremont Glacier over the last 270 years

Preindustrial deposition rates of mercury from the atmosphere may be about 4 ng per 1 L of ice deposited. Volcanic eruptions and related natural sources are responsible for approximately half of atmospheric mercury emissions.

Atmospheric mercury contamination in outdoor urban air at the start of the 21st century was measured at 0.01–0.02 μg/m3. A 2001 study measured mercury levels in 12 indoor sites chosen to represent a cross-section of building types, locations and ages in the New York area. This study found mercury concentrations significantly elevated over outdoor concentrations, at a range of 0.0065 – 0.523 μg/m3. The average was 0.069 μg/m3.

Half of mercury emissions are attributed to mankind. The sources can be divided into the following estimated percentages:

  • 65% from stationary combustion, of which coal-fired power plants are the largest aggregate source (40% of U.S. mercury emissions in 1999). This includes power plants fueled with gas where the mercury has not been removed. Emissions from coal combustion are between one and two orders of magnitude higher than emissions from oil combustion, depending on the country.
  • 11% from gold production. The three largest point sources for mercury emissions in the U.S. are the three largest gold mines. Hydrogeochemical release of mercury from gold-mine tailings has been accounted as a significant source of atmospheric mercury in eastern Canada.
  • 6.8% from non-ferrous metal production, typically smelters.
  • 6.4% from cement production.
  • 3.0% from waste disposal, including municipal and hazardous waste, crematoria, and sewage sludge incineration.
  • 3.0% from caustic soda production.
  • 1.4% from pig iron and steel production.
  • 1.1% from mercury production, mainly for batteries.
  • 2.0% from other sources.

The above percentages are estimates of the global human-caused mercury emissions in 2000, excluding biomass burning, an important source in some regions.

A serious industrial disaster was the dumping of waste mercury compounds into Minamata Bay, Japan, between 1932 and 1968. It is estimated that over 3,000 people suffered various deformities, severe mercury poisoning symptoms or death from what became known as Minamata disease.

China is estimated to produce 50% of the mercury emissions, most of which result from the production of vinyl chloride.

Joss paper burning on the street, a common tradition practiced in Asia, Hong Kong, 2023

Mercury also enters into the environment through the improper disposal of mercury-containing products. Due to health concerns (see below), toxics use reduction efforts are cutting back or eliminating mercury in such products. For example, the amount of mercury sold in thermostats in the United States decreased from 14.5 tons in 2004 to 3.9 tons in 2007.

The tobacco plant readily absorbs and accumulates heavy metals such as mercury from the surrounding soil into its leaves. These are subsequently inhaled during tobacco smoking. While mercury is a constituent of tobacco smoke, studies have largely failed to discover a significant correlation between smoking and Hg uptake by humans compared to sources such as occupational exposure, fish consumption, and amalgam tooth fillings.

A less well-known source of mercury is the burning of joss paper, which is a common tradition practiced in Asia, including China, Vietnam, Hong Kong, Thailand, Taiwan and Malaysia.

Spill cleanup

Mercury spills pose an immediate threat to people handling the material, in addition to being an environmental hazard if the material is not contained properly. This is of particular concern for visible mercury, or mercury in liquid state, as its unusual appearance and behavior for a metal makes it an attractive nuisance to the uninformed. Procedures have been developed to contain mercury spills, as well as recommendations on appropriate responses based on the conditions of a spill. Tracking liquid mercury away from the site of a spill is a major concern in liquid mercury spills; regulations emphasize containment of the visible mercury as the first course of action, followed by monitoring of mercury vapors and vapor cleanup. Several products are sold as mercury spill adsorbents, ranging from metal salts to polymers and zeolites.

Sediment contamination

Sediments within large urban-industrial estuaries act as an important sink for point source and diffuse mercury pollution within catchments. A 2015 study of foreshore sediments from the Thames estuary measured total mercury at 0.01 to 12.07 mg/kg with mean of 2.10 mg/kg and median of 0.85 mg/kg (n=351). The highest mercury concentrations were shown to occur in and around the city of London in association with fine grain muds and high total organic carbon content. The strong affinity of mercury for carbon rich sediments has also been observed in salt marsh sediments of the River Mersey, with a mean concentration of 2 mg/kg, up to 5 mg/kg. These concentrations are far higher than those in the salt marsh river creek sediments of New Jersey and mangroves of Southern China, which exhibit low mercury concentrations of about 0.2 mg/kg.

Occupational exposure

EPA workers clean up residential mercury spill in 2004

Due to the health effects of mercury exposure, industrial and commercial uses are regulated in many countries. The World Health Organization, OSHA, and NIOSH all treat mercury as an occupational hazard; both OSHA and NIOSH, among other regulatory agencies, have established specific occupational exposure limits on the element and its derivative compounds in liquid and vapor form. Environmental releases and disposal of mercury are regulated in the U.S. primarily by the United States Environmental Protection Agency.


Fish and shellfish have a natural tendency to concentrate mercury in their bodies, often in the form of methylmercury, a highly toxic organic compound of mercury. Species of fish that are high on the food chain, such as shark, swordfish, king mackerel, bluefin tuna, albacore tuna, and tilefish contain higher concentrations of mercury than others. Because mercury and methylmercury are fat soluble, they primarily accumulate in the viscera, although they are also found throughout the muscle tissue. Mercury presence in fish muscles can be studied using non-lethal muscle biopsies. Mercury present in prey fish accumulates in the predator that consumes them. Since fish are less efficient at depurating than accumulating methylmercury, methylmercury concentrations in the fish tissue increase over time. Thus species that are high on the food chain amass body burdens of mercury that can be ten times higher than the species they consume. This process is called biomagnification. Mercury poisoning happened this way in Minamata, Japan, now called Minamata disease.


Some facial creams contain dangerous levels of mercury. Most contain comparatively non-toxic inorganic mercury, but products containing highly toxic organic mercury have been encountered. New York City residents have been found to be exposed to significant levels of inorganic mercury compounds through the use of skin care products.

Effects and symptoms of mercury poisoning

Toxic effects include damage to the brain, kidneys and lungs. Mercury poisoning can result in several diseases, including acrodynia (pink disease), Hunter-Russell syndrome, and Minamata disease. Symptoms typically include sensory impairment (vision, hearing, speech), disturbed sensation and a lack of coordination. The type and degree of symptoms exhibited depend upon the individual toxin, the dose, and the method and duration of exposure. Case–control studies have shown effects such as tremors, impaired cognitive skills, and sleep disturbance in workers with chronic exposure to mercury vapor even at low concentrations in the range 0.7–42 μg/m3.

A study has shown that acute exposure (4–8 hours) to calculated elemental mercury levels of 1.1 to 44 mg/m3 resulted in chest pain, dyspnea, cough, hemoptysis, impairment of pulmonary function, and evidence of interstitial pneumonitis. Acute exposure to mercury vapor has been shown to result in profound central nervous system effects, including psychotic reactions characterized by delirium, hallucinations, and suicidal tendency. Occupational exposure has resulted in broad-ranging functional disturbance, including erethism, irritability, excitability, excessive shyness, and insomnia. With continuing exposure, a fine tremor develops and may escalate to violent muscular spasms. Tremor initially involves the hands and later spreads to the eyelids, lips, and tongue. Long-term, low-level exposure has been associated with more subtle symptoms of erethism, including fatigue, irritability, loss of memory, vivid dreams and depression.


Research on the treatment of mercury poisoning is limited. Currently available drugs for acute mercurial poisoning include chelators N-acetyl-D, L-penicillamine (NAP), British Anti-Lewisite (BAL), 2,3-dimercapto-1-propanesulfonic acid (DMPS), and dimercaptosuccinic acid (DMSA). In one small study including 11 construction workers exposed to elemental mercury, patients were treated with DMSA and NAP. Chelation therapy with both drugs resulted in the mobilization of a small fraction of the total estimated body mercury. DMSA was able to increase the excretion of mercury to a greater extent than NAP.



140 countries agreed in the Minamata Convention on Mercury by the United Nations Environment Programme (UNEP) to prevent mercury vapor emissions. The convention was signed on 10 October 2013.

United States

In the United States, the Environmental Protection Agency is charged with regulating and managing mercury contamination. Several laws give the EPA this authority, including the Clean Air Act, the Clean Water Act, the Resource Conservation and Recovery Act, and the Safe Drinking Water Act. Additionally, the Mercury-Containing and Rechargeable Battery Management Act, passed in 1996, phases out the use of mercury in batteries, and provides for the efficient and cost-effective disposal of many types of used batteries. North America contributed approximately 11% of the total global anthropogenic mercury emissions in 1995.

The United States Clean Air Act, passed in 1990, put mercury on a list of toxic pollutants that need to be controlled to the greatest possible extent. Thus, industries that release high concentrations of mercury into the environment agreed to install maximum achievable control technologies (MACT). In March 2005, the EPA promulgated a regulation that added power plants to the list of sources that should be controlled and instituted a national cap and trade system. States were given until November 2006 to impose stricter controls, but after a legal challenge from several states, the regulations were struck down by a federal appeals court on 8 February 2008. The rule was deemed not sufficient to protect the health of persons living near coal-fired power plants, given the negative effects documented in the EPA Study Report to Congress of 1998. However newer data published in 2015 showed that after introduction of the stricter controls mercury declined sharply, indicating that the Clean Air Act had its intended impact.

The EPA announced new rules for coal-fired power plants on 22 December 2011. Cement kilns that burn hazardous waste are held to a looser standard than are standard hazardous waste incinerators in the United States, and as a result are a disproportionate source of mercury pollution.

European Union

In the European Union, the directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (see RoHS) bans mercury from certain electrical and electronic products, and limits the amount of mercury in other products to less than 1000 ppm. There are restrictions for mercury concentration in packaging (the limit is 100 ppm for sum of mercury, lead, hexavalent chromium and cadmium) and batteries (the limit is 5 ppm). In July 2007, the European Union also banned mercury in non-electrical measuring devices, such as thermometers and barometers. The ban applies to new devices only, and contains exemptions for the health care sector and a two-year grace period for manufacturers of barometers.


Norway enacted a total ban on the use of mercury in the manufacturing and import/export of mercury products, effective 1 January 2008. In 2002, several lakes in Norway were found to have a poor state of mercury pollution, with an excess of 1 μg/g of mercury in their sediment. In 2008, Norway's Minister of Environment Development Erik Solheim said: "Mercury is among the most dangerous environmental toxins. Satisfactory alternatives to Hg in products are available, and it is therefore fitting to induce a ban." Products containing mercury were banned in Sweden in 2009, while elemental mercury has been banned from manufacture and use in all but a few applications (such as certain energy-saving light sources and amalgam dental fillings) in Denmark since 2008.

See also

This page was last updated at 2024-02-08 07:33 UTC. Update now. View original page.

All our content comes from Wikipedia and under the Creative Commons Attribution-ShareAlike License.


If mathematical, chemical, physical and other formulas are not displayed correctly on this page, please useFirefox or Safari