Metal leaf

Metal leaf processing
22k gold leaf applied with an ox hair brush during the process of gilding
A small gold nugget 5 mm in diameter (bottom) can be expanded to about 20,000 times its initial surface through hammering, producing a gold foil surface of about one half square meter with a thickness of 0.2–0.3 μm. Toi gold mine, Japan.
Burnishing gold leaf with an agate stone tool during the water gilding process
Evandro Angerami. Oil and gold leaf. Brazil

A metal leaf, also called composition leaf or schlagmetal, is a thin foil used for decoration. Metal leaves can come in many different shades. Some metal leaves may look like gold leaf but does not contain any real gold. This type of metal leaf is often referred to as imitation leaf.

Metal leaves are usually made of gold (including many alloys), silver, copper, aluminium, brass (sometimes called "Dutch metal" typically 85% Copper and 15% zinc) or palladium, sometimes also platinum.

Vark is a type of silver leaf used for decoration in Indian cuisine.

Goldbeating, the technique of producing metal leaves, has been known for more than 5,000 years.

See also

References



This page was last updated at 2019-11-15 20:02 UTC. Update now. View original page.

All our content comes from Wikipedia and under the Creative Commons Attribution-ShareAlike License.


Top

If mathematical, chemical, physical and other formulas are not displayed correctly on this page, please useFirefox or Safari