# Oblique projection

*This article discusses the imaging of 3D objects. For an abstract mathematical discussion, see Projection (linear algebra).*

Part of a series on |

Graphical projection |
---|

**Oblique projection** is a simple type of technical drawing of graphical projection used for producing two-dimensional (2D) images of three-dimensional (3D) objects.

The objects are not in perspective and so do not correspond to any view of an object that can be obtained in practice, but the technique yields somewhat convincing and useful.

Oblique projection is commonly used in technical drawing. The cavalier projection was used by French military artists in the 18th century to depict fortifications.

Oblique projection was used almost universally by Chinese artists from the 1st or 2nd centuries to the 18th century, especially to depict rectilinear objects such as houses.

Various graphical projection techniques can be used in computer graphics, including in Computer Aided Design (CAD), computer games, computer generated animations, and special effects used in movies.

## Overview

Oblique projection is a type of parallel projection:

- it projects an image by intersecting parallel rays (projectors)
- from the three-dimensional source object with the drawing surface (projection plane).

In both oblique projection and orthographic projection, parallel lines of the source object produce parallel lines in the projected image. The projectors in oblique projection intersect the projection plane at an oblique angle to produce the projected image, as opposed to the perpendicular angle used in orthographic projection.

Mathematically, the parallel projection of the point on the -plane gives . The constants and uniquely specify a parallel projection. When , the projection is said to be "orthographic" or "orthogonal". Otherwise, it is "oblique". The constants and are not necessarily less than 1, and as a consequence lengths measured on an oblique projection may be either larger or shorter than they were in space. In a general oblique projection, spheres of the space are projected as ellipses on the drawing plane, and not as circles as they would appear from an orthogonal projection.

Oblique drawing is also the crudest "3D" drawing method but the easiest to master. One way to draw using an oblique view is to draw the side of the object you are looking at in two dimensions, i.e. flat, and then draw the other sides at an angle of 45°, but instead of drawing the sides full size they are only drawn with half the depth creating 'forced depth' – adding an element of realism to the object. Even with this 'forced depth', oblique drawings look very unconvincing to the eye. For this reason oblique is rarely used by professional designers or engineers.

## Oblique pictorial

In an *oblique pictorial* drawing, the angles displayed among the axis, as well as the foreshortening factors (scale) are arbitrary.
More precisely, any given set of three coplanar segments originating from the same point may be construed as forming some oblique perspective of three sides of a cube. This result is known as Pohlke's theorem, from the German mathematician Pohlke, who published it in the early 19th century.

The resulting distortions make the technique unsuitable for formal, working drawings. Nevertheless, the distortions are partially overcome by aligning one plane of the image parallel to the plane of projection. Doing so creates a true shape image of the chosen plane. This specific category of oblique projections, whereby lengths along the directions and are preserved, but lengths along direction are drawn at angle using a reduction factor is very much in use for industrial drawings.

*Cavalier projection*is the name of such a projection, where the length along the axis remains unscaled.*Cabinet projection*, popular in furniture illustrations, is an example of such a technique, where in the receding axis is scaled to half-size (sometimes instead two-thirds the original).

## Cavalier projection

In **cavalier projection** (sometimes **cavalier perspective** or **high view point**) a point of the object is represented by three coordinates, *x*, *y* and *z*. On the drawing, it is represented by only two coordinates, *x″* and *y″*. On the flat drawing, two axes, *x* and *z* on the figure, are perpendicular and the length on these axes are drawn with a 1:1 scale; it is thus similar to the dimetric projections, although it is not an axonometric projection, as the third axis, here *y*, is drawn in diagonal, making an arbitrary angle with the *x″* axis, usually 30 or 45°. The length of the third axis is not scaled.

It is very easy to draw, especially with pen and paper. It is thus often used when a figure must be drawn by hand, e.g. on a black board (lesson, oral examination).

The representation was initially used for military fortifications. In French, the "cavalier" (literally *rider, horseman*, see *Cavalry*) is an artificial hill behind the walls that allows to see the enemy above the walls. The cavalier perspective was the way the things were seen from this high point. Some also explain the name by the fact that it was the way a rider could see a small object on the ground from his horseback.

## Cabinet projection

The term *cabinet projection* stems from its use in illustrations by the furniture industry. Like cavalier perspective, one face of the projected object is parallel to the viewing plane, and the third axis is projected as going off at an angle (typically atan(2) or about ~63.4°). Unlike cavalier projection, where the third axis keeps its length, with cabinet projection the length of the receding lines is cut in half.

### Mathematical formula

As a formula, if the plane facing the viewer is *xy*, and the receding axis is *z*, then a point *P* is projected like this:

Where is the mentioned angle.

The transformation matrix is:

Alternatively one could remove one third from the leading arm projected off the starting face, thus giving the same result.

## Military projection

In the *military projection*, the angles of the *x* and *z*-axis and *y* and *z* -axis are at 45°, meaning that the angle between the *x*-axis and the *y*-axis is 90°. That is, the *xy*-plane is not skewed. It is rotated over 45°, though.

## Examples

Besides technical drawing and illustrations, video games (especially those preceding the advent of 3D games) also often use a form of oblique projection. Examples include *SimCity*, *Ultima VII*, *Ultima Online*, *EarthBound*, *Paperboy* and, more recently, *Tibia*.

The figures to the left are orthographic projections. The figure to the right is an

**oblique projection**with an angle of 30° and a ratio of 1⁄2.Potting bench drawn in

**cabinet projection**with an angle of 45° and a ratio of 2/3.Pieces of fortification in

**cavalier perspective**(*Cyclopaedia*vol. 1, 1728).A representative Korean painting depicting the two royal palaces, Changdeokgung and Changgyeonggung located in the east of the main palace, Gyeongbokgung.

*Entrance and yard of a yamen*. Detail of scroll about Suzhou by Xu Yang, ordered by the Qianlong Emperor. 18th century18th century plan of Port-Royal-des-Champs drawn in

**military projection**A 3D rendered magnetic resonance angiography, shown in an oblique projection in order to distinguish the aberrant subclavian artery