Rover Environmental Monitoring Station

Rover Environmental Monitoring Station (REMS)
Pia19164-main rems from pia19142.jpg
REMS on Mars
OperatorNASA / JPL
ManufacturerSpanish Astrobiology Center (CSIC-INTA)
Instrument typeweather station
Host spacecraft
SpacecraftCuriosity rover
OperatorNASA / JPL


Temperatures on Mars from REMS on the Curiosity Rover (August 16/17, 2012).

Rover Environmental Monitoring Station (REMS) is a weather station on Mars for Curiosity rover contributed by Spain and Finland.[1][2] REMS measures humidity, pressure, temperature, wind speeds, and ultraviolet radiation on Mars.[3] This Spanish project is led by the Spanish Astrobiology Center and includes the Finnish Meteorological Institute as a partner,[4][5] contributing pressure and humidity sensors.[4][6]

MSL Rover Environmental Monitoring Station
Closeup of a REMS sensor

Overview

All sensors are located around three elements: two booms attached to the rover Remote Sensing Mast (RSM), the Ultraviolet Sensor (UVS) assembly located on the rover top deck, and the Instrument Control Unit (ICU) inside the rover. Goals include understanding Martian general circulation, microscale weather systems, local hydrological cycle, destructive potential of UV radiation, and subsurface habitability based on ground-atmosphere interaction.[4][5]

By August 18, 2012, REMS was turned on and its data was being returned to Earth.[2] The temperature at that time: 37 degrees Fahrenheit (2.8 degrees Celsius).[2] On August 21, 2012, one of two windspeedmeters returned data with errors. After testing it was concluded that it was broken, probably hit by a rock on descent.[7] Martian winds can still be detected with the other sensor.[7]

Reports are posted on the Center for Astrobiology website and twitter daily.[8][9]

Parts of REMS[10]

  • Instrument Control Unit
  • Ultraviolet Sensor
  • Boom 1 with:
    • Air Temperature Sensor
    • Wind Sensor
    • Ground Temperature Sensor
  • Boom 2 with:
    • Air Temperature Sensor
    • Wind Sensor
    • Humidity Sensor

The pressure sensor can detect pressures from 1 to 1150 Pa (Pascal) (0.000145038 PSI to 0.1667934 PSI).[11] For comparison, 1 atmosphere is 101,325 Pascals or 14.7 PSI.[12]

The air temperature, wind speed and direction sensor for InSight Mars lander (planned for 2018 launch) is based on REMS, also contributed by Spain.[13]

Results

Graph of temperatures at Gale crater

See also

References

  1. ^ Spain Supplies Weather Station for Next Mars Rover - Marsdaily
  2. ^ a b c W. Harwood - Curiosity's Mars travel plans tentatively mapped - CBS
  3. ^ "Rover Environmental Monitoring Station for MSL mission" (PDF). 4th International workshop on the Mars Atmosphere: modelling and observations. Pierre und Marie Curie University. February 2011. Retrieved 2012-08-06.
  4. ^ a b c "MSL Science Corner: Rover Environmental Monitoring Station (REMS)". NASA/JPL. Retrieved September 9, 2009.
  5. ^ a b "Mars Science Laboratory Fact Sheet" (PDF). NASA/JPL. Retrieved June 20, 2011.
  6. ^ Finnish technology lands on Mars - UUTISET
  7. ^ a b Materia - El sensor de viento español de 'Curiosity' se estropea (Google Translate)
  8. ^ "Archived copy". Archived from the original on 2012-08-23. Retrieved 2012-08-23.CS1 maint: archived copy as title (link) Center for Astrobiology
  9. ^ https://twitter.com/MarsWxReport REMS on Twitter
  10. ^ [1]
  11. ^ "Rover Environmental Monitoring Station (REMS)". an.rsl.wustl.edu. Retrieved 2018-01-24.
  12. ^ "The MSDS HyperGlossary: Pressure Unit Conversions". www.ilpi.com. Retrieved 2018-01-24.
  13. ^ [2]

External links


This page was last updated at 2019-11-15 23:14 UTC. Update now. View original page.

All our content comes from Wikipedia and under the Creative Commons Attribution-ShareAlike License.


Top

If mathematical, chemical, physical and other formulas are not displayed correctly on this page, please useFirefox or Safari